Detail information for plastic fan blade mould:
Cavity: single cavity mould.
Runner system: 1 point YUDO hot runner.
Mould base: C45.
Core & Cavity steel: 718H.
Surface finish as mirror polish.Fall automatically.
 |
| fan blade mould final assembly products |
 |
| detail for blade mould |
ZL mould company is a professional mould suppliers from TaiZhou,China. Pallet mould, dustbin mould and injection crate mould 3 big area in our factory. Injection fan blade mould for industrial is another parts in our factory.
 |
| plastic fan mould |
 |
| plastic injection fan blade mould |
Plastic fan mould have female and male two parts.The half connect with the injection gate of injection machine is female half, female part of fan blade mould usually with sprue. Injection fan mould female usually with sprue, support plate and mould plate. Some simple mould could remove the support plate and increase the mould plate. And the sprue cover is standard parts and do not suggest to remove it.
Fan blade mould use sprue cover could make mould assembling more easy, convenience for change it, no need polish. Some mould must need have female demoulding structure. Plastic fan blade mould male side combine with mould male plate,support plate,demoulding parts, fan mould leg and machine fixing parts.
Fan blade mould sprue design will influence the out-view of plastic fan.If the design is not good , the product will have defects. Snack flow will easily have when without blockage.To the high demands of plastic fan mould, over flow and exhaust design is necessary to add. Fan mould over flow place could use ejector pin to avoid left mark on mould plate.Use ejector pin will not let over flow not influence the plastic fan mould life.
Demoulding construction of fan mould not only have ejector pin ,also have return pin and some mould need add spring to make mould automatically. Pillar support,cooling system, and channel are indispensable parts of mould.
When design for plastic fan blade mould, basic mould design and steel size need to confirm at the first time, so that steel could finish book quickly to save time. Complex fan product need to make analysis for the product first,then check the mould steel size. Some move part like slide lifting need make hardening, increase the hardness of steel to make mould life longer.
Before hardening, the fan mould plate should make machining process first: pillar hole,return hole,cavity hole, screw hole,sprue cover hole, pull hole, cooling hole.Also the machining of male and female should be finish first.
To know more information about fan mould,welcome to contact us.
Fan blade mould use sprue cover could make mould assembling more easy, convenience for change it, no need polish. Some mould must need have female demoulding structure. Plastic fan blade mould male side combine with mould male plate,support plate,demoulding parts, fan mould leg and machine fixing parts.
Fan blade mould sprue design will influence the out-view of plastic fan.If the design is not good , the product will have defects. Snack flow will easily have when without blockage.To the high demands of plastic fan mould, over flow and exhaust design is necessary to add. Fan mould over flow place could use ejector pin to avoid left mark on mould plate.Use ejector pin will not let over flow not influence the plastic fan mould life.
Demoulding construction of fan mould not only have ejector pin ,also have return pin and some mould need add spring to make mould automatically. Pillar support,cooling system, and channel are indispensable parts of mould.
When design for plastic fan blade mould, basic mould design and steel size need to confirm at the first time, so that steel could finish book quickly to save time. Complex fan product need to make analysis for the product first,then check the mould steel size. Some move part like slide lifting need make hardening, increase the hardness of steel to make mould life longer.
Before hardening, the fan mould plate should make machining process first: pillar hole,return hole,cavity hole, screw hole,sprue cover hole, pull hole, cooling hole.Also the machining of male and female should be finish first.
To know more information about fan mould,welcome to contact us.
Email:sales02@zhilianmould.com
WhatsApp:86-13906582915
没有评论:
发表评论