Detail for seal cap mould:
Name: cap mould
Material:60%HDPE +% 40 LDPE,Black
Steel: H13
mould base :S50C
runner system:cold runner with side gate
ejector system: 2 time ejector with pin and lifter.
 |
| plastic cap mould supplier |
Due to water bottle cap mould production usually need large quality,size is small and complicated in internal structure,muti-cavity with hot runner for caps mould is best solution.After mould flow analysis for muti-cavity cap mould-32 cavity ,every cavity with 1 point hot runner into top of cap is the best way.
Consider for easy machining, the water caps mould manifold planning to make 2 plate.The top one is H shape,the second plate divide into 4 pieces, every pieces of plate will have 8 point of runner gate. Point gate will be use for this 32 cavity cap mould, point gate have good function for keep pressure,reduce stress and cost will be less compare to valve gate.
unscrewing cap mould structure are better then screwing cap mould, But the demolding system for unscrewing cap mould still very important. After know the basic feature of caps, the screwing inside the cap will ejector directly. Core side will be design as insert, separate for 3 parts: Screwing core, water proof ring core and ejector core.
Consider for easy machining, the water caps mould manifold planning to make 2 plate.The top one is H shape,the second plate divide into 4 pieces, every pieces of plate will have 8 point of runner gate. Point gate will be use for this 32 cavity cap mould, point gate have good function for keep pressure,reduce stress and cost will be less compare to valve gate.
unscrewing cap mould structure are better then screwing cap mould, But the demolding system for unscrewing cap mould still very important. After know the basic feature of caps, the screwing inside the cap will ejector directly. Core side will be design as insert, separate for 3 parts: Screwing core, water proof ring core and ejector core.
In order to guarantee long mould life,we use H13 for cavity and core of this cap mould. Cold runner with side gate,when the mould open,the runner will be separate from products.This runner system could help customer to save the cost.
After finish T1 test,we find the seal can not easy to take out,we discuss with customer and decide to make V gad in the seal place to help take easy.
If you looking for cap mould maker and plastic injection mould supplier from China,Welcome to contact me.
 |
| plastic injection mould supplier |
没有评论:
发表评论